PS3 Stinger USB Module - Back up PS3

PS3 Stinger is a USB flash drive - it is a plug and play solution that installs within seconds. It enables you to back up PS3 games onto the internal PS3 hard drive, or onto external hard drives. It works with both the newer slim and older large PS3. [b]Operation:[/b] Once the power to your console is completely disconnected: - Insert PS3 USB Chip into a USB port on the PS3 - Start up the PS3 and press the EJECT button - The LED (which should have been red initially) will change to green - If everything is working ok, there will be a link to Install Package File in the game menu [b]Installing the Backup Manager:[/b] You only need to install the backup manager once, using the following instructions: - Download and add the .pkg file to a USB flash drive using your PC. - Connect the USB flash drive to your PS3 and then go to the game menu, followed by Install Package File and select the .pkg file. - Once it is installed, you will see the Backup Manager directly in the Game Menu. [b]Requirements:[/b] - PS3 Console (fat or slim) - Console (firmware) must be version 3.41 only - Remove all discs from the drive - Do not connect any devices to the console via USB - IMPORTANT: The console must be completely switched off before using the PS3 USB Chip. For fat versions, use the switch at the rear. For slim versions, simply remove the power cable. This is extremely important for the process to work correctly when you start the console